|
[ BMW ] [ Citroen ] [ Ford ] [ Honda ] [ Mazda ] [ MG ] [ Mitsubishi ] [ Nissan ] [ Peugeot ] [ Renault ]
[ Rover ] [ Seat ] [ Subaru ] [ Toyota ] [ Vauxhall ] [ Volkswagen ]
|
BMW |
|
|
| BMS001 |
BMW Mini Cooper & One (mk1) (Single 3" round rolled in) |
8 |
A |
| BMS004 |
BMW E30 325i 87 – 91 Three piece systems only, Twin entry into back box (Twin 3.5" Round tails) |
3 |
K |
| BMS007 |
BMW E36 325/8I 24V Saloon & Coupe 12/90 to 12/95 & Cabrio 03/93 to 12/95 (Twin 3" Round tails) |
9 |
F |
If you require any more information please call us..
|
CITROEN |
|
|
| CTS001 |
Citroen Saxo Late type 2000 on, (4.5" Jap style tail) |
8 |
S |
| CTS002-X |
Citroen Saxo 1.6 VTS & VTR 1996 to 2000, (3.5" Round rolled in tail) CAT back |
8 |
G |
| CTS002 |
Citroen Saxo 1.6 VTS & VTR 1996 to 2000, (3.5" Round rolled in tail) With CAT replacement |
4 |
G |
| CTS003 |
Citroen C2 VTR/ VTS/ GT (4" rolled in tail) |
8 |
O |
If you require any more information please call us..
|
FORD |
|
|
| FDS001 |
Ford Cosworth 2WD’s 3 door, RS500 & Sapphire - 3" bore pipework
(3, 3.5 or 4" rolled out tail) |
1 |
A,B,C |
| FDS002 |
Ford Sierra Sapphire Cosworth 4x4, On CAT cars this system will remove the CAT - 3" bore pipework (3, 3.5 or 4" rolled out tail) |
1 |
A,B,C |
| FDS003 |
Ford Escort Cosworth (both small & large turbos), This system will remove the CAT on all cars (Oval tail pipe, larger than standard) |
1 |
J |
| FDS005 |
Ford Cosworth 2wd (All) OE Copy performance system (3"or 4" rolled in) |
1 |
I,O |
| FDS006 |
Ford Escort RS Turbo 2.5" Bore system Series 1 & 2, 1985 - 91 (3, 3.5 or 4" rolled out tail) |
1 |
A,B,C |
| FDS007 |
Ford Escort RS Turbo Evolution 3" Bore system Series 1 & 2, 1985 - 91 (4" rolled in, 4" rolled out) |
1 |
C,O |
| FDS008 |
Ford Escort RS 2000 Mk5/6 4x4 (3.5" Rolled in tail & 3.5" rolled out tail) |
4 |
G,B |
| FDS008-X |
Ford Escort RS 2000 Mk5/6 4x4 CAT back (3.5" Rolled in tail & 3.5" rolled out tail) |
8 |
G,B |
| FDS009 |
Ford Escort RS 2000 MK5/6 2wd, With CAT replacement pipe (3.5" Rolled in tail & 3.5" rolled out tail) |
4 |
G,B |
| FDS009-X |
Ford Escort RS 2000 MK5/6 2wd, CAT Back (3.5" Rolled in tail & 3.5" rolled out tail) |
8 |
G,B |
| FDS010 |
Ford Escort XR3i MK3/4 1982 – 89 Fits all except EFi, If you have EFI ask for details (3.5" Rolled in tail) |
3 |
G |
| FDS011 |
Ford Escort Mk5/6 Zetec Full system with Cat replacement (3.5" Rolled in tail) (lambda sensor needs relocating for air con models) |
12 |
G |
| FDS011-X |
Ford Escort Mk5/6 Zetec 16v MK5 & 6, 1.6 & 1.8 (3.5" Rolled in tail) |
8 |
G |
| FDS012 |
Ford Fiesta MK5 Zetec 2000 to new shape. (3.5" Rolled in tail) |
8 |
G, B |
| FDS013 |
Ford Fiesta XR2i MK3 CVH 8v 1989 - 92 (3.5" Rolled in tail) |
3 |
G |
| FDS014 |
Ford Fiesta XR2i MK3 16v Zetec 1992 - 95, inc RS1800i, 1.6 16v Ghia, 1.6 Si, (3.5" Rolled in tail) |
8 |
G |
| FDS015 |
Ford Fiesta RS Turbo 1990 - 92 (3.5" & 4" rolled in and 4" rolled out tail) |
1 |
C,G,O |
| FDS016 |
Ford Puma (inc FRP) (3.5" rolled in tail) |
8 |
G |
| FDS017 |
Ford KA Mk1&2 (3.5" rolled in tail) |
8 |
G |
| FDS018 |
Ford Mondeo 2.5 V6 24v 1994 - 98 (Twin 3.5" rolled in) |
8 |
P |
| FDS019 |
Ford Cougar V6 (twin 3" rolled in tail) |
8 |
U |
| FDS020 |
Ford Mondeo ST24 V6 (3.5" rolled in tail) |
8 |
G |
| FDS021-16 |
Ford Focus Mk1, 1.6 Zetec 2 & 4 door hatch (3.5" rolled in & 4" slash cut tail) |
8 |
G,R |
| FDS021-ZC |
Ford Focus Mk1, 1.8 & 2.0 Zetec, 2 & 4 door Hatch (3.5" rolled in & 4" slash cut tail) |
8 |
G,R |
| FDS021-ST |
Ford Focus ST170 (3.5" rolled in & 4" slash cut tail) |
8 |
G,R |
| FDS022 |
Ford Focus RS, full system (4" rolled out, 4.5" slash cut, 4" rolled in tails) |
12 |
C,O,S |
| FDS022-X |
Ford Focus RS CAT back (4" rolled out, 4.5" slash cut, 4" rolled in tails) |
10 |
C,O,S |
| FDS023 |
Ford Mondeo ST200 (Twin 3.5" slash cut tail) |
8 |
P2 |
| FDS024 |
Ford Mondeo ST220 (Twin 3.5" rolled in / twin 4.5" slash cut tail) |
8 |
P,S2 |
| FDS025-CAM |
Ford Fiesta Mk6 ST150 - Full system with sports CAT & Exhaust Manifold 4:2:1 for up to 200bhp |
CAM |
B,G,O,S |
| FDS025-RAM |
Ford Fiesta Mk6 ST150 - Full system with CAT replacement & Exhaust Manifold 4:2:1 for up to 200bhp |
RAM |
B,G,O,S |
| FDS025-CAM2 |
Ford Fiesta Mk6 ST150 - Full system with sports CAT & Exhaust Manifold 4:1 for up to 200bhp |
CAM2 |
B,G,O,S |
| FDS025-RAM2 |
Ford Fiesta Mk6 ST150 - Full system with CAT replacement & Exhaust Manifold 4:1 for up to 200bhp |
RAM2 |
B,G,O,S |
| FDS025-CAT |
Ford Fiesta Mk6 ST150 - Full system with sports CAT (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
CAT |
B,G,O,S |
| FDS025 |
Ford Fiesta Mk6 ST150 - Full system (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
12 |
B,G,O,S |
| FDS025-X1 |
Ford Fiesta Mk6 ST150 - Full system without Cat replacement pipe (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
11 |
B,G,O,S |
| FDS025-X2 |
Ford Fiesta Mk6 ST150 - Full system without downpipe (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
4 |
B,G,O,S |
| FDS025-CATX2 |
Ford Fiesta Mk6 ST150 - Full system with sports CAT, no downpipe (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
CATX2 |
B,G,O,S |
| FDS025-X3 |
Ford Fiesta Mk6 ST150 - Cat back (3.5" rolled out, 4.5" slash cut, 3.5 rolled in, 4" rolled in) |
8 |
B,G,O,S |
| FDS026CAT |
Ford Focus Mk2 ST Complete system with SPORTS CAT (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
CAT |
O2,P3,S2,Z |
| FDS026 |
Ford Focus Mk2 ST Complete system with CAT replacement (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
1 |
O2,P3,S2,Z |
| FDS026-X1 |
Ford Focus Mk2 ST Full system no CAT replacement (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
11 |
O2,P3,S2,Z |
| FDS026-X2 |
Ford Focus Mk2 ST Full system CAT replacement no downpipe* (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
4 |
O2,P3,S2,Z |
| FDS026-CATX2 |
Ford Focus Mk2 ST Full system with sports CAT no downpipe* (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
CATX2 |
O2,P3,S2,Z |
| FDS026-X3 |
Ford Focus Mk2 ST CAT back (4" rolled out, 4.5" slash cut, 4" rolled in, 3.5" rolled in slash, 4" rolled in slash cut) |
8 |
O2,P3,S2,Z |
| FDS027 |
Ford Sierra Sapphire Cosworth 4x4 OE Style twin centre box system (3" rolled in & 4" rolled in tails) |
1 |
I,O |
| FDS029CAT |
Focus RS mk2 Complete system with sports CAT |
CAT |
|
| FDS029 |
Focus RS mk2 Complete system with CAT replacement |
1 |
|
| FDS029-X1 |
Focus RS mk2 Full system no CAT replacement |
11 |
|
| FDS029-X2 |
Focus RS mk2 Full system no downpipe |
4 |
|
| FDS029-CATX2 |
Focus RS mk2 Full system with sports CAT, no downpipe |
CATX2 |
|
| FDS029-X3 |
Focus RS mk2 CAT back |
8 |
|
If you require any more information please call us..
|
HONDA |
|
|
| HDS001 |
Honda Civic (EG, EH), all models 1991-96, CAT Replacement (3" & 3.5" rolled in, 3.5" slash cut, 4.5" slash cut tails) |
4 |
I,S |
| HDS001-X |
Honda Civic (EG, EH), all models 1991-96, CAT Back (3" & 3.5" rolled in, 3.5" slash cut, 4.5" slash cut tails) |
8 |
I,S |
| HDS002 |
Honda CRX 1987-90 Non CAT cars only (Twin 3" round tails) |
3 |
F |
| HDS003 |
Honda Prelude 2.2 V-Tec (92-96) UK & Import inc. CAT replacement (4.5" slash cut tail) |
4 |
S |
| HDS003-X |
Honda Prelude 2.2 V-Tec (92-96) UK & Import CAT back (4.5" slash cut tail) |
8 |
S |
| HDS004 |
Honda Civic (EK) most models 1996-2001, with CAT replacement(3" rolled in, 4.5" slash cut tails) |
4 |
I,S |
| HDS004-X |
Honda Civic (EK) most models 1996-2001, CAT back (3" rolled in, 4.5" slash cut tails) |
8 |
I,S |
| HDS005-X |
Honda Civic Type-R (EP) 2001-2005, CAT back (4" rolled in & 4.5" jap style tail) |
8 |
O,S |
| HDS006 |
Honda Civic Coupe (EJ1&2) 1994-96, (4.5" Jap style) |
8 |
O,R |
| HDS006 |
Honda Integra Type-R (DC2) 1996-01, (4.5" Jap style) |
8 |
O,R |
| HDS007 |
Honda Civic 5 door, most models 1996-2001 (3.5" rolled in, 4.5" Jap style tail pipe) |
4 |
G,S |
| HDS007-X |
Honda Civic 5 door, most models 1996-2001 CAT back (3.5" rolled in, 4.5" Jap style tail pipe) |
8 |
G,S |
| HDS008 |
Honda Accord Type-R (CH1) 1998-2003, Complete system including downpipe (Twin 3.5" rolled in, Twin 4") |
12 |
P, R2 |
| HDS008-X1 |
Honda Accord Type-R (CH1) 1998-2003, Full system without CAT replacement (Twin 3.5" rolled in, Twin 4") |
11 |
P, R2 |
| HDS008-X2 |
Honda Accord Type-R (CH1) 1998-2003, Full system without downpipe (Twin 3.5" rolled in, Twin 4") |
4 |
P, R2 |
| HDS008-X3 |
Honda Accord Type-R (CH1) 1998-2003, CAT back (Twin 3.5" rolled in, Twin 4") |
8 |
P, R2 |
| HDS009-X3 |
Honda Civic Sport (EP) 1.6 V-Tec 2001-2005, (6" x 4" oval, 5" round & Twin 3" Round rolled in) |
8 |
E,H,V |
If you require any more information please call us..
|
MAZDA |
|
|
| MXS001 |
Mazda MX5 Mk1, 1.6 & 1.8 (97/98 cars may need alternative centre, phone for details) (3.5" rolled in tail) |
8 |
G |
| MX001-C16 |
Mazda MX5 Mk1, 1.6 CAT pipe |
|
|
| MX001-C18 |
Mazda MX5 Mk1, 1.8 CAT pipe (not for some 97/98 cars) |
|
|
| MXS002 |
Mazda RX7 Mk3, Twin Turbo (4.5" jap style tail) |
8 |
S |
| MXS003 |
Mazda MX5 Mk2, with cat replacement pipe (3.5" rolled in & 4.5" Jap style tails) |
4 |
G,S |
| MXS003-X |
Mazda MX5 Mk2, Cat back (3.5" rolled in & 4.5" Jap style tails) |
8 |
G,S |
|
MG |
|
|
| MGS001 |
MG ZR all petrol models, (6x4" Oval tail, 4" rolled in) |
8 |
O,H |
If you require any more information please call us..
|
MITSUBISHI |
|
|
| MSS001 |
Mitsubishi Lancer Evo 4/5/6 Full System (4" rolled in & 5" Jap style tails) |
12 |
E,O |
| MSS001-X1 |
Mitsubishi Lancer Evo 4/5/6 Full without CAT replacement (4" rolled in & 5" Jap style tails) |
11 |
E,O |
| MSS001-X2 |
Mitsubishi Lancer Evo 4/5/6 Downpipe back system (4" rolled in & 5" Jap style tails) |
4 |
E,O |
| MSS001-X3 |
Mitsubishi Lancer Evo 4/5/6 CAT Back (4" rolled in & 5" Jap style tails) |
8 |
E,O |
| MSS003 |
Mitsubishi FTO V6 - Full system inc. downpipe (Twin 3" round, twin oval, 5" Jap style tails) |
12 |
E,F,W |
| MSS003-X1 |
Mitsubishi FTO V6 - Full without CAT replacement (Twin 3" round, twin oval, 5" Jap style tails) |
11 |
E,F,W |
| MSS003-X2 |
Mitsubishi FTO all models - Full without downpipe (Twin 3" round, twin oval, 5" Jap style tails) |
4 |
E,F,W |
| MSS003-X3 |
Mitsubishi FTO all models - CAT Back (Twin 3" round, twin oval, 5" Jap style tails) |
8 |
E,F,W |
| MSS004 |
Mitsubishi GTO, Twin turbo & NA (Includes CAT replacement pipe) (4" rolled in, 4" rolled out tails) |
4 |
O2,Z |
| MSS004-X |
Mitsubishi GTO, Twin turbo & NA, CAT back (4" rolled in, 4" rolled out tails) |
8 |
O2,Z |
| MSS005 |
Mitsubishi Lancer Evo 7/8/9 Full system (4" rolled in, 4" rolled out & 5" Jap style tails) |
12 |
C,E,O |
| MSS005-X1 |
Mitsubishi Lancer Evo 7/8/9 Full without CAT replacement (4" rolled in, 4" rolled out & 5" Jap style tails) |
11 |
C,E,O |
| MSS005-X2 |
Mitsubishi Lancer Evo 7/8/9 Downpipe back system (4" rolled in, 4" rolled out & 5" Jap style tails) |
4 |
C,E,O |
| MSS005-X3 |
Mitsubishi Lancer Evo 7/8/9 CAT Back (4" rolled in, 4" rolled out & 5" Jap style tails) |
8 |
C,E,O |
| MSS006-CAT |
Mitsubishi Lancer Evo X complete system with sports cat (5" slash cut tails) |
CAT |
E |
| MSS006 |
Mitsubishi Lancer Evo X complete system with cat replacement (5" slash cut tails) |
12 |
E |
| MSS006-X3 |
Mitsubishi Lancer Evo X cat back system (5" slash cut tails) |
4 |
E |
If you require any more information please call us..
|
NISSAN |
|
|
| NSS001 |
Nissan 200 SX Turbo S13 (5" jap style or 6x4" oval tail) |
1 |
E,H |
| NSS002 |
Nissan 300ZX Turbo & NA (Does not fit SWB cars) (Twin 6x4" ovals, Quad 3" round tails) |
8 |
H2,T |
| NSS003 |
Nissan Sunny/ Pulsar Full system (3.5" rolled in, 4" rolled out & 5" Jap style tail pipes) |
12 |
C,E,G |
| NSS003-X1 |
Nissan Sunny/ Pulsar Full without CAT replacement (3.5" rolled in, 4" rolled out & 5" Jap style tail pipes) |
11 |
C,E,G |
| NSS003-X2 |
Nissan Sunny/ Pulsar Downpipe back system (3.5" rolled in, 4" rolled out & 5" Jap style tail pipes) |
4 |
C,E,G |
| NSS003-X3 |
Nissan Sunny/ Pulsar CAT Back (3.5" rolled in, 4" rolled out & 5" Jap style tail pipes) |
8 |
C,E,G |
| NSS004-X2 |
Nissan 350Z Downpipe back (Twin 4" rolled in, Twin 4" rolled out, Twin 4.5" slash cut tail pipes) |
4 |
O2,S2,Z |
| NSS004-X3 |
Nissan 350Z CAT back (Twin 4" rolled in, Twin 4" rolled out, Twin 4.5" slash cut tail pipes) |
8 |
O2,S2,Z |
|
For the 200SX S14 you must specify S14 or S14A as the downpipes are different |
|
|
| NSS005(A) |
Nissan 200SX S14/14A Full system (6x4" oval tail & 5" Slash cut) |
12 |
E,H |
| NSS005-X1(A) |
Nissan 200SX S14/14A Full without CAT replacement tails (6x4" oval tail & 5" Slash cut) |
11 |
E,H |
| NSS005-X2 (A) |
Nissan 200SX S14/14A Downpipe back system (6x4" oval tail & 5" Slash cut) |
4 |
E,H |
| NSS005-X3 |
Nissan 200SX S14 & 14A CAT Back (6x4" oval tail & 5" Slash cut) |
8 |
E,H |
| NSS006 |
Nissan 200SX S15 Full system (6x4" oval & 5" Jap style tails) |
12 |
E,H |
| NSS006-X1 |
Nissan 200SX S15 Full without CAT replacement (6x4" oval & 5" Jap style tails) |
11 |
E,H |
| NSS006-X2 |
Nissan 200SX S15 Downpipe back system (6x4" oval & 5" Jap style tails) |
4 |
E,H |
| NSS006-X3 |
Nissan 200SX S15 CAT Back (6x4" oval & 5" Jap style tails) |
8 |
E,H |
If you require any more information please call us..
|
PEUGEOT |
|
|
| PGS001 |
Peugeot 106 XSi, Aug 94 - Jun 96, cars with a CAT only, Includes CAT replacement (Twin oval tail pipes) |
8 |
Y |
| PGS001-X |
Peugeot 106 XSi, Aug 94 - Jun 96, cars with a CAT only, CAT back (Twin oval tail pipes) |
4 |
Y |
| PGS004 |
Peugeot 306 1.9 Turbo diesel 1993 on, On CAT cars this system will remove the CAT (3.5" rolled in tail) |
1 |
G |
| PGS005 |
Peugeot 306 XSi/ GTi6/ S16 (3.5" rolled in tail) |
8 |
G |
| PGS006 |
Peugeot 306 2.0 Hdi (3.5" rolled in tail) |
1 |
G |
| PGS007 |
Peugeot 106 Gti/ Rallye 2001 on, (Twin oval tail pipes) |
8 |
Y |
| PGS008 |
Peugeot 106 GTi & 1.6 Rallye, 97-2000, includes CAT replacement (Twin oval tail pipes) |
4 |
Y |
| PGS008-X |
Peugeot 106 GTi & 1.6 Rallye, 97-2000, CAT back (Twin oval tail pipes) |
8 |
Y |
If you require any more information please call us..
|
RENAULT |
|
|
| RNS001 |
Renault Clio Mk1, most models, 16v, Williams 1 & 2, RSi, 1.4i, 1.2i, CAT cars only (3.5" rolled in tail) |
4 |
G |
| RNS001-X |
Renault Clio Mk1, most models, 16v, Williams 1 & 2, RSi, 1.4i, 1.2i, CAT cars only – CAT back (3.5" rolled in tail) |
8 |
G |
| RNS002 |
Renault 19 16v Phase 1 & Phase 2 Hatch, With CAT replacement (3.5" rolled in tail) |
4 |
G |
| RNS002-X |
Renault 19 16v Phase 1 & Phase 2 Hatch, CAT back (3.5" rolled in tail) |
8 |
G |
| RNS003 |
Renault 19 16v Phase 1, Chamade/ Saloon 1990 – 92, With CAT replacement (3.5" rolled in tail) |
4 |
G |
| RNS003-X |
Renault 19 16v Phase 1, Chamade/ Saloon 1990 – 92, CAT back (3.5" rolled in tail) |
8 |
G |
| RNS004 |
Renault Clio Sport 172 (Twin 3.5" tail pipes) |
8 |
K |
| RNS005 |
Renault 5 Turbo (Optional front pipe available) (3.5" rolled in tail) |
6 |
G |
| RNS005A |
Renault 5 Turbo Full system with optional front pipe, (3.5" rolled in tail) |
1 |
G |
| RNS006 |
Renault Clio 3 (will fit most Mk2) (Twin 3" tail pipes) |
8 |
F |
| RNS007 |
Renault Clio 182 CAT back (Twin 3.5" rolled in) |
8 |
K,P3 |
| RNS008-X3 |
Megane 2.0 Turbo 225/230, Full system from CAT (Twin Oval 4.5" x 3") |
10 |
Q2 |
If you require any more information please call us..
|
ROVER |
|
|
| RVS002 |
Rover 220 Turbo, GTI, Si 1992 - 96 With CAT replacement (3.5" rolled in tail) |
4 |
G |
| RVS002-X |
Rover 220 Turbo, GTI, Si 1992 - 96 CAT back (3.5" rolled in tail) |
8 |
G |
| RVS003 |
Rover 420 Turbo 1992 - 96 (3.5" rolled in tail) |
4 |
G |
| RVS003-X |
Rover 420 Turbo 1992 – 96 CAT back (3.5" rolled in tail) |
8 |
G |
| RVS004 |
Rover 620 Turbo (must specify MGF or Rover flange) (Twin 3" round tails) |
8 |
F |
| RVS005 |
Rover 820 Turbo (must specify MGF or Rover flange), 1991 – 95 with CAT replacement pipe (Twin 3.5 rolled in tails) |
4 |
K |
| RVS005-X |
Rover 820 Turbo (must specify MGF or Rover flange), 1991 – 95 CAT back (Twin 3.5 rolled in tails) |
8 |
K |
If you require any more information please call us..
|
SEAT |
|
|
| SES001 |
Seat Leon Cupra 'R' Mk1 (1999-2005) (4" rolled in, 4" slash cut, 5" slash cut) |
8 |
E,O,R |
If you require any more information please call us..
|
SUBARU |
|
|
| SBS001 |
Subaru Impreza Turbo, Classic, UK / Import, all models, This system removes the CAT (4" rolled in & 5" Jap style ) |
1 |
E,G,O |
| SBS002 |
Subaru Legacy Estate, 1990-1994, 2.0 single turbo, This system removes the CAT (4" rolled in tail) |
1 |
O |
| SBS003 |
Subaru Legacy Saloon, 1990-1994, 2.0 single turbo, This system removes the CAT (4" rolled in tail) |
1 |
O |
| SBS005 |
Subaru Impreza Turbo, Classic, CAT back (3.5" rolled in & 4" rolled in tail pipes) |
8 |
O |
| SBS007 |
Subaru Impreza Turbo 2001 model on, 3" bore (All versions inc 2.0 & 2.5) (4" rolled in tail & 5" jap style coming soon) |
1 |
E,O |
| SBS007-X3 |
Subaru Impreza Turbo 2001 model on, 3" bore (All versions inc 2.0 & 2.5) 3" bore, CAT back (4" rolled in tail & 5" jap style coming soon) |
8 |
E,O |
If you require any more information please call us..
|
TOYOTA |
|
|
| TYS001 |
Toyota MR2 Mk1 NA & Supercharged, 1985 - 90 (Twin 2.5" round & 4" slash cut tails) |
2 |
N,R |
| TYS002 |
Toyota MR2 MK2 1991 on Full system (Twin 3" slash cut tails, Twin 3.5" rolled in) |
12 |
L,P |
| TYS002-X1 |
Toyota MR2 MK2 1991 on Full system, no CAT replacement (Twin 3" slash cut tails, Twin 3.5" rolled in) |
11 |
L,P |
| TYS002-X2 |
Toyota MR2 MK2 1991 on downpipe back (Twin 3" slash cut tails, Twin 3.5" rolled in) (later 3SGE engined cars only) |
4 |
L |
| TYS002-X3 |
Toyota MR2 MK2 1991 on CAT back (Twin 3" slash cut tails, Twin 3.5" rolled in) |
8 |
L |
| TYS003 |
Toyota MR2 Turbo 1991 on (Twin 3.5" rolled in tail pipes, Twin 4" slash cut) |
10 |
P |
| TYS004 |
Toyota Celica Mk2 2.0 16v (ST182) 90-94 (CAT back for 92 to 94 cars) (3.5" rolled in tail) |
3,(8) |
G |
| TYS005 |
Toyota Celica 2.0 16v (ST202) 94 on (Twin 3.5" rolled in tails) |
8 |
K |
| TYS006 |
Toyota Celica GT4 MK2 (ST165/185) 1989 - 94 (4.5" slash cut tail) |
10 |
C,O,S |
| TYS007 |
Toyota Celica GT4 MK3 (ST205) (4.5" slash cut tail) |
10 |
C,O,S |
| TYS009 |
Toyota Supra Turbo MA70, 1989 on (Twin 3.5" rolled in tail pipes) |
1 |
K |
| TYS015 |
Toyota MR2 Roadster / MRS |
8 |
S |
If you require any more information please call us..
|
VAUXHALL |
|
|
| VXS001-X1 |
Vauxhall Corsa VXR complete system with sports cat (Tri Oval tailpipe) |
11 |
H3 |
| VXS001-X3 |
Vauxhall Corsa VXR cat back system (Tri Oval tailpipe) |
8 |
H3 |
| VXS002 |
Vauxhall Corsa B, all models, petrol & diesel (twin oval & twin DTM) |
8 |
M,W |
| VXS003 |
Vauxhall Tigra Mk1 94-2000, 1.4, 1.6 16v (Twin oval & twin DTM tails) |
8 |
M,W |
| VXS004 |
Vauxhall Calibra 8v 1990 on, excluding automatic, with CAT replacement pipe (Twin oval & twin DTM tails) |
4 |
M,W |
| VXS004-X |
Vauxhall Calibra 8v 1990 on, excluding automatic, CAT Back (Twin oval & twin DTM tails) |
8 |
M,W |
| VXS004 |
Vauxhall Calibra 16v 1990 - 93, including CAT replacement pipe (Does not fit Eco-Tech) (Twin oval & twin DTM tails) |
4 |
M,W |
| VXS004-X |
Vauxhall Calibra 16v 1990 on, including ECO-TECH, (does not fit automatic), CAT Back (Twin oval & twin DTM tails) |
8 |
M,W |
| VXS011 |
Vauxhall Corsa C most models (4.5" jap style) |
8 |
S |
| VXS016 |
Vauxhall Vectra Most models 1.8 to V6 & Turbo Diesel up to 1998 (Twin 3" round rolled in) |
8 |
F |
| VXS017 |
Vauxhall Astra Mk4 Turbo Coupe & 888 (4.5 x 3" oval tail pipe) |
8 |
Q |
| VXS018 |
Vauxhall Astra Mk4 Turbo Hatchback GSi & Sri (3.5" rolled in tail) |
8 |
O |
| VXS019-X1 |
Vauxhall Astra Mk5 VXR (LEH engine) full system without CAT replacement (TRI oval tail) |
11 |
H3 |
| VXS019-X3 |
Vauxhall Astra Mk5 VXR (LEH engine) full system CAT back (TRI oval tail) |
8 |
H3 |
| VXS020 |
Vauxhall Astra Mk5 CDTi Complete system (Single 4.5" x 3" oval tail) |
12 |
Q |
| VXS020-X1 |
Vauxhall Astra Mk5 CDTi Full system without CAT replacement (Single 4.5" x 3" oval tail) |
11 |
Q |
| VXS020-X2 |
Vauxhall Astra Mk5 CDTi Full system without downpipe (Single 4.5" x 3" oval tail) |
4 |
Q |
| VXS020-X3 |
Vauxhall Astra Mk5 CDTi CAT back (Single 4.5" x 3" oval tail) |
8 |
Q |
| VXS021-X1 |
Vauxhall Astra Mk5 Turbo (LEL & LER engines) Full system without CAT replacement |
11 |
Q |
| VXS021-X3 |
Vauxhall Astra Mk5 Turbo (LEL & LER engines) CAT back |
8 |
Q |
If you require any more information please call us..
|
Volkswagon - VW |
|
|
| VWS001 |
VW MK1 Golf GTi & GLi 8v (does not fit Clipper) (3" rolled in tail) |
3 |
I |
| VWS002 |
VW MK2 Golf GTi 8v & 16v, 1.8 Driver (twin oval tail) |
3 |
Y |
| VWS004 |
VW MK3 Golf GTi 8v, 16v GTi & VR6 (Twin oval tail) |
8 |
Y |
| VWS006 |
VW MK4 Golf GTi Turbo (Twin 3" round rolled in & Twin oval tail pipe, for cars without tail pipe cut outs in bumper) |
8 |
F,W |
| VWS007 |
VW Polo Gti 2000 on (Twin 3" rolled in, 4" Rolled in) |
8 |
F,O |
| VWS008-X3 |
VW Golf Mk4 R32 (Twin 4") |
8 |
R2 |
If you require any more information please call us.. |
