Vehicle Identification Number - a vehicle identification number must be permanently displayed and legible on a vehicle first used
on or after 1 August 1980

Registration Plate - condition, security, legibility and format of letters/numbers

Lights - condition, operation, security and correct colour. The headlamps
will also be checked to see if the aim is correct

Steering and Suspension - correct condition and operation

Wipers and Washers - operate to give the driver a clear view of the road

Windscreen - condition and drivers view of the road

Horn - correct operation and type

Seatbelts - all seatbelts installed are checked for type, condition, operation
and security. All compulsory seatbelts must be in place.

Seats - Front & Rear Seats Secure.

Fuel System - no leaks, fuel cap fastens correctly and seals securely.
The fuel cap will need to be opened. Make sure the key is available

Exhaust Emissions - vehicle meets the requirement for exhaust emission.
These vary on the age and fuel type of the vehicle

Exhaust System - complete, secure, without serious leaks and silences effectively

Vehicle Structure - free from excessive corrosion or damage in specific areas.

Doors - open and close. Latch securely in closed position. Front doors should
open from inside and outside the vehicle. Rear doors may need to be opened
to gain access to testable items

Mirrors - presence, condition and security

Wheels and Tyres - condition, security, tyre size and type, and tread depth.

Brakes - condition, operation and performance ( efficiency test ). Suitable
vehicles will be tested on a roller brake tester. Vehicles such as those with permanent 4-wheel drive will be tested either on a suitable road using a
properly calibrated and maintained decelerometer or a plate brake tester.
_